Indoor Bonsai Tree Care

Product Description
Branch Bender Small 170 Branch benders, often referred to as levers, are used when a trunk or branch, in addition to being wired, must have additional pressure to bend it slowly into a different position. Actually, the bender works as a combination vise-lever, moving the branch or trunk until it reaches the desired position. Our five sizes of branch benders accept maximum branch diameters of 5/8″ to 1 1/2″. The hooks and jacks are coated with red vinyl plastic to cushion the branch and minimize scuffing. The jack screw is brass. This bender is the small size, it is 2 1/4×2 1/2″, hook to hook spacing 2 1/2″ , Hook length 5/8″, Jack screw length 1 1/2″. Branch diameter max. 5/8″. All brass construction…. More >>
Bonsai Branch Bender 170 Small Size

Product Description
This Branch Bender – Bonsai Jack is used to create bends and sways in Bonsai tree trunks and branches or to straighten them. This is a largest version of branch bender. It’s chrome plated finish with an adjustable spread. The distance between the hooks is… More >>
Adjustable Bonsai Jack – Branch Bender – Large

Product Description
This is for 2 pieces of high quality branch benders. They are considered intermediate size. The distance between two side bars is about 3″ when they are sitting furthest apart…. More >>
Branch Bender 2 Pieces

Product Description
This Branch Bender – Bonsai Jack is used to create bends and sways in Bonsai tree trunks and branches or to straighten them. This is a largest version of branch bender. It’s chrome plated finish with an adjustable spread. The distance between the hooks is 1 3/4 inches at its narrowest and 3 inches wide open. The hooks also can be extended outward by about an inch. It’s very easy to use and very effective. Just turn the screw once or twice every few days for results…. More >>
Large Adjustable Bonsai Tree Brass Bonsai Jack – Branch Bender From Joebonsai